Wood Moisture Meter Lignomat Scanner D

Measuring
Range
5-60% dependent upon species setting*
Display0.1% resolution for the entire range.
Species
Corrections
71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)
Gypsum
Scale
N/A
Reference
Scale
0-99 for non-wood building materials
Calibration
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check External calibration check block #TS is available to verify the calibration and functions of meter.
IncludedPouch, one 9V battery, manual and laminated wood group chart.
SizePocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight8 ounces (200g), made out of high-impact plastic
WarrantyAll moisture meters have a 2 year warranty. Pins and battery are excluded.
Kategori:

Deskripsi

Wood Moisture Meter Lignomat Scanner D The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.

The entire measuring pad has to be on a flat and smooth surface for accurate readings

*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.

The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.

Spesification Wood Moisture Meter Lignomat Scanner D :

Measuring
Range
5-60% dependent upon species setting*
Display0.1% resolution for the entire range.
Species
Corrections
71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)
Gypsum
Scale
N/A
Reference
Scale
0-99 for non-wood building materials
Calibration
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary.
Calibration Check External calibration check block #TS is available to verify the calibration and functions of meter.
IncludedPouch, one 9V battery, manual and laminated wood group chart.
SizePocket-size  2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″
Weight8 ounces (200g), made out of high-impact plastic
WarrantyAll moisture meters have a 2 year warranty. Pins and battery are excluded.

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Wood Moisture Meter Lignomat Scanner D”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *